What Causes Shingles to Curl or Lift on Arkansas Homes?

Categories: Roof Maintenance, Roof Repair

Table of Contents

Share this post

Are you ready to get started with your roofing project? Contact our team today to schedule an appointment.

Table of Contents

TL;DR: What Causes Shingles to Curl or Lift on Arkansas Homes?

Shingles curl or lift due to a combination of heat, ventilation imbalance, installation factors, and weather exposure. In Northwest Arkansas, these issues often develop gradually and are not always caused by storms. Understanding the root causes helps homeowners address problems early and protect roof performance.

Introduction

Seeing shingles curl or lift can be unsettling for homeowners. It often raises immediate concerns about roof failure or storm damage. While wind can certainly play a role, curled or lifted shingles are frequently the result of longer term conditions rather than a single weather event.

In Northwest Arkansas, roofs are exposed to hot summers, humidity, wind, and seasonal temperature swings. These factors interact with how a roof was installed and how well it is ventilated. Over time, that interaction can cause shingles to lose their shape or seal.

This article explains the most common reasons shingles curl or lift on Arkansas homes and what those signs may indicate about overall roof health.

1. Heat Exposure and Material Aging

Prolonged sun and UV exposure

Asphalt shingles are designed to withstand sun exposure, but over many years, ultraviolet rays gradually break down the asphalt binder. As shingles age and dry out, they lose flexibility.

Once shingles become brittle, they are more likely to curl at the edges or corners rather than laying flat against the roof surface.

South and west facing roof slopes

In Northwest Arkansas, south and west facing slopes typically experience the most intense sun exposure. These areas often show signs of curling or lifting sooner than other parts of the roof.

Uneven wear across roof sections can often be traced back to sun and heat exposure patterns.

2. Ventilation Imbalance Beneath the Roof

Excessive attic heat from below

Poor attic ventilation allows heat to build up beneath the roof deck. This heat rises into the shingles from below, placing stress on the adhesive strips that help shingles seal.

When those adhesive bonds weaken, shingles are more likely to lift, especially during windy conditions.

Moisture related stress

Ventilation also helps manage moisture. When moisture becomes trapped in the attic, it can affect the roof deck and shingle backing. Over time, this contributes to distortion and curling.

3. Installation Related Factors

Improper nailing techniques

Shingles must be nailed in specific locations and with proper pressure. Nails placed too high, too low, or driven incorrectly can prevent shingles from sealing properly.

Improper fastening may not cause immediate problems, but it can contribute to lifting as the roof ages.

Shingles installed in cooler conditions

If shingles are installed when temperatures are too low, the adhesive strips may not bond as intended. While they may eventually seal, incomplete bonding increases the risk of lifting later on.

4. Weather Patterns Common in Northwest Arkansas

Wind exposure over time

Repeated wind exposure can gradually loosen shingles that are already stressed by heat or installation factors. Even moderate winds can affect shingles that are no longer sealing properly.

This is why lifted shingles do not always indicate recent storm damage.

Temperature fluctuations

Daily and seasonal temperature swings cause roofing materials to expand and contract. Over time, this movement places strain on shingle edges and fasteners.

For homeowners researching shingles curling Fayetteville AR, these regional conditions are often a major contributor.

5. Why Curling and Lifting Should Not Be Ignored

Increased vulnerability to water intrusion

Once shingles lift or curl, water can more easily move beneath them. This exposes underlayment and roof decking to moisture they were not designed to handle directly.

Accelerated wear on surrounding shingles

Lifted shingles often lead to increased stress on neighboring shingles. This can cause problems to spread beyond the initial area.

6. How to Address Curled or Lifted Shingles

Professional evaluation matters

Because multiple factors can contribute to curling or lifting, a professional inspection helps identify the root cause rather than just the visible symptom.

Addressing ventilation, installation details, or drainage issues may be just as important as repairing the affected shingles.

Monitoring and maintenance

In some cases, early curling can be monitored rather than immediately repaired, depending on severity and roof age. Knowing what stage the issue is in helps homeowners plan appropriately.

Final Thoughts

Shingles curl or lift for many reasons, most of which develop gradually over time. Heat exposure, ventilation imbalance, installation details, and local weather all play a role in how shingles age on Arkansas homes.

For homeowners in Northwest Arkansas, recognizing these signs early allows for better planning and fewer surprises. If you have concerns about curled or lifted shingles or want to understand what may be causing them, FES Roofing is available at (479) 275-5332 to provide local guidance and education.